Stock Code

002851

Languages

DEX PM3000 R for Robotic Welding of Aluminum Framework of Windows and Doors


The Products
Aluminum windows and doors frameworks are made of extruded aluminum profile of various shapes. It's widely used in construction and decoration. A huge numbers working in manufacturing are located in the major cities in Southern and Central China. 

图1.jpg
Aluminum Doors


图2.jpg
Aluminum Windows

The Technical Challenges
Riveting used to be the major method of joining of aluminum windows and doors. But gap will appear at the joint points after long-time usage. The appearance is damaged. Leaking will also happen so that wind and water will go thru. Heat preservation would also turn ineffective. The following challenges also exit for arc welding.

1)Burn-thru happens frequently because the thickness is only 1.0-1.5mm;

2)Gas pore is often found inside the seam for the sections with low welding amperage. 

3)Inadequate fusion on both sides of the workpiece. Low intensity. 

4)Low welding speed and production efficiency. 

5)Heavy workload of grinding because of welding spatter. Welding appearance is therefore influenced. 

图3.jpg

图3-1.jpg

Defects Resulted from Welding Quality


MEGMEET Equipment and Solutions
Dex PM3000 was recommended with pulse process for aluminum. As a inverter welding equipment with fully digital-control, Dex PM3000 is capable of welding carbon steel and  stainless steel with synergic and pulse MIG/MAG, and aluminum with pulse MIG process. It is featured with the following strong points. 
1)Smooth in arc ignition, stable and consistent in welding arc, low in welding spatter. 
2)Fast in arc ignition and crater. Centralized in arc energy, which brings better penetration depth and welding speed. 
3)Expert data of aluminum welding are available. Parameter of different sections of the welding process are also open for adjustment to meet demands of on-site conditions and to ensure welding quality. 
4)Wire-feeder is equipped with high performance motor, coded wheel and feedback mechanism and four-roller structure. Precise and stable wire-feeding is ensured for high-quality welding.

图4.jpg

Workpiece

图5.jpg

Welding Results

图6.jpg

After Grinding


Comparison of Welding Result
Dex PM3000 was installed with robotic welding station. Production efficiency has been greatly increased. Welding speed went up to 0.6m/min. Welding result turned to be uniform and bright with well controlled finishing. Defectives of gas pore and undercut did not happen. Welding spatter was extremely low. The first time yield rate has reached 98%. 


The Application

图7.jpg

Robotic Welding Station on Site